Anchors & Accessories
Girder Grip & Wire Anchor Strops are made from high strength
materials & can be used in vertical or horizontal plane. Girder/
Concrete Anchors & Strops are Approved to CE EN 795.
ISC Rigging Plates are made from high strength Aluminium and have
20mm (3/4”) holes, to allow Karabiners to be fully rotated.
GG101
RP300
GG201
RP310
RP320
GG301
Technical Information
GG101
GG201
GG301
WS100
WS150
WS200
RP300
RP310
RP320
Weight
MBS
Type
28kN (6294lbf)
28kN (6294lbf)
28kN (6294lbf)
25kN (5620lbf)
25kN (5620lbf)
25kN (5620lbf)
36kN (8093lbf)
40kN (8992lbf)
45kN (10116lbf)
Small (Girder Grip)
Large (Concrete Anchor)
Medium (Pre-cast Anchor)
100cm (39”)
150cm (59”)
200cm (78”)
Small
Medium
Large
550g (19oz)
1160g (41oz)
680g (24oz)
502g (18oz)
780g (28oz)
998g (35oz)
93g (3oz)
219g (8oz)
442g (16oz)
Wire Strops - EN795
Stainless Steel version now available
Rigging Plates
Girder/Concrete Anchors - EN795
Features & Applications
ISC Girder & Concrete Anchors are a quick and easy portable anchorage
solution which can be used in the vertical or horizontal plane. These
anchors are operated by using two fingers to pull back the red collar.
This action retracts the retention bar, allowing the device to be inserted
in to the anchor hole. Once the device is in position, the red collar can
be released, causing the retention bar to engage, fixing the device in the
anchor hole.
ISC Wire Strops are available with 7mm Galvanised Steel or Stainless
Steel wire and with a choice of thimble (rigid) eye, or soft eye loops. ISC
Strops are fitted with a protective PVC cover. Strops are available in a
range of standard lengths (at 0.5m increments), with bespoke lengths
also available on request.
Working Length:
43mm (1 11/16”)
Working Length:
335mm (13 3/16”)
Working Length:
100mm (4”)
WSX00 Range
Hand & Chest Ascenders
ISC Hand Ascenders are sleek & ergonomic by design. They are
machined from high-strength Aluminium extrusion and are suitable
for heavy-duty use.
The ISC Chest Ascender is compact & lightweight and has been
designed for use on a full body harness, and therefore it is ideal for
use in Rope Access work.
RP229
Chest Ascender
Hand Ascenders
Technical Information
RP210
RP220
RP230
RP240
Weight
Rope Ø
Type
9-13mm (5/16-1/2”)
9-13mm (5/16-1/2”)
9-13mm (5/16-1/2”)
9-13mm (5/16-1/2”)
Left Handed
Right Handed
Left Handed
Right Handed
364g (13oz)
364g (13oz)
367g (13oz)
367g (13oz)
Hand Ascenders - Ultrasafe
Hand Ascender - Professional
RP210
RP220
RP230
RP240
23
22
ISC Hand Ascenders are fitted with Stainless Steel cams.
All ISC Hand Ascenders have both primary and secondary
attachment holes. ISC Ultrasafe Hand Ascenders are fitted
with a pin to limit the range movement of the cam in order to
prevent the rope from being accidentally pulled out between
the cam and the body. ISC Professional and Ultrasafe Hand
Ascenders have moulded comfort-grip handles.
The Rope Adjuster Plate allows the user to quickly and easily
adjust the rope as required. The Rope Adjuster Plate offers
non-slip rope adjustment. The Foot Loop is lighweight and
compact, with a wear sleeve for durability of the foot area.
The cam is spring-loaded and fitted with a catch mechanism,
to allow for easy one-handed operation of the device whilst
attaching/removing the device to/from the rope.
The Chest Ascender has an increased grip at low load, even
on wet/greasy/oily ropes. The spikes are angled downwards,
giving maximum grip, whilst allowing the cam to slide easily
up the rope.
Suitable for use on 9 - 13mm (5/16-1/2”) Rope
Weight:
164g (6oz)
Foot Adjuster/Foot Loop
RP305
KT305
Weight:
31g (1oz)
Rope Ø:
9-13mm (5/16-1/2”)
91-145cm ( 3”-5’9”)
Weight:
31g (1oz)
Rope Ø:
9-13mm (5/16-1/2”)