13
12
harnesses
rope park
fullbody
W0068BR
W0068BB
- black version
F
W
P
Body II standard
Fully adjustable fall-arrest harness with various
attachment points.
• two fall-arrest attachment points according to
EN 361
• harness is compact and light-weight, thus suita-
ble for horizontal or inclined space. It also allows
temporary hanging in.
• intended for working in places with the risk of
fall
• flat rear attachment point does not affect com-
fort when wearing the backpack or breathing
apparatus
• shoulder and leg loops webbings are colour
distinguished for easy manipulation
• webbing stitched in the buckle simplify handling
• two gear loops with max. load 5 kg
• easy to adjust, easy to put on and off
• suitable also for rope courses and adventure
parks
• different colour of rear triangle for each size
(S/M/L- grey, XL/XXL- yellow)
• 2 sizes fit whole size range from 150 to 210 cm
Size: S-M/L, XL/XXL
Weight: 1025 g / 1090 g • 36.16 oz / 38.45 oz
XCE 1019 • EN 361
W0073
W
Pole II
Belt for work positioning and prevention against
the falls from a height.
• anatomic padded waist belt ensures minimal
bruising and enough comfort in the waist area
• two side “D” ring for work positioning according
to EN 358, tested for 15 kN strength
• two braided gear loops with a bearing capacity
of 5 kg
• slots designed for a secure hanging of expen-
sive equipment (such as power saw, drilling
machine,..) with a capacity of 1 kN
• speed buckles allow easy manipulation when
dressing up and undressing
W0071BY
W0071BB
- black version
F
W
P
Body II speed
Fully adjustable fall-arrest harness with various
attachment points.
• version with Speed buckles on the leg loops
enables easy putting the harness on
• easy to adjust, easy to put on and off
• webbing stitched in the buckle simplify handling
Size: S/M/L, XL/XXL
Weight: 1185 g / 1240 g • 41.8 oz / 43.74 oz
XCE 1019 • EN 361
Recommended use:
• for work positioning and prevention of falls from
a height
• possible combination with fullbody fall-arrest
harness BODY II
Size: S, M/L, XL
Weight: (M/L) 595 g • 21 oz
XCE 1019 • EN 358
W0050
P
Tarzan
Fully adjustable full body harness intended for rope
courses and adventure parks.
• attachment point for work in hanging position,
rappelling according to EN 813.
• anatomic waist belt and leg loops padding
• speed buckle connecting shoulder straps with
waist belt. Increased comfort when putting the
harness on.
• buckle with a captive bar matches strict American
standards (ANSI, CSA). Its minimum strength is
17.2 kN. No webbing slippage in a buckle. Its
construction ensures longtime operation and
efficiency (easy releasing and fastening even
when dirty and tough webbing).
• Shoulder webbing has different colour for easy
manipulation
• Left leg loops with red colour inside helps to put
the harness on
• Different colour of rear plate for each size.
• Dorsal attachment point according EN 361.
Steel D-ring with a bearing capacity of 15 kN.
This D-ring is flat and settled on a padding.
• Webbing strap stitched in the buckle simplify
handling with buckle
Size: XS - S, M - XL
Weight: 1530 g (M - XL) ±15 g • 54 oz
XCE 1019 • EN 813 • EN 361
W0087BY
P
ROPEDANCER II
Fully adjustable full body harness with various
attachment points intended for rope courses and
adventure parks
• easy to put on and off,
• easy to adjust, thanks to 5 double buckles and
1 SPEED buckle
• bright color font lower attachment point for
rappelling and belaying according to EN 813
• waist belt in different (black) color for better
orientation within the harness
• front and rear attachment points according to
EN 361 for fall-arrest
• 2 gear loops with a bearing capacity of 5 kg
• max. rated load of the harness 150 kg
• different color of the rear triangle for each size
• suitable also for working at height
Weight: (S/M/L) 1195 g • 42.15 oz
XCE 1019 • EN 361 • EN 813
C5036BR00
P
Tarzan light
Fully adjustable full body harness intended for
rope courses and adventure parks.
• front attachment point for belaying and rappe-
ling according to EN 12277 type C
• easy to put on
• anatomic waist belt and leg loops
• speed buckle enables to put on the harness
easily
• buckle with a captive bar matches strict American
standards (ANSI, CSA). No webbing slippage in a
buckle. Its construction ensures longtime opera-
tion and efficiency (easy releasing and fastening
even when dirty and toughwebbing).
Size: UNI
Weight: 990 g ± 15 g • 34.9 oz
XCE 1019 • EN 12277
rear attachment point
W0083
Ex-ten III
Support of the waist belt to increase comfort at
a back area of worker at height
• 7 mm thick padding. Foam with close pore does
not absorb a water
• high density polyethylene creates support of the
back and comfortable work
• lace webbing made from polyester with high
abrasion resistance
Size: S, M/L, XL
Weight: (M/L) 460 g • 16.23 oz